Build time today 1.0 hours - Total build time 129.0 hours.
Man time today 1.0 hours - Total man time 147.0 hours.
Only spent a little time today, I had ordered an 8mm straight pipe coupler which I wanted to use to connect the existing crank case breather pipe to the new 8mm pipe I was using to connect to the oil catch can. I was using the existing pipe as this reduced from 13mm to 8mm. Using this and some cable wrap I finished assembling the oil catch can ready for installation.
I also fitted the number plate light to the rear body work section, meaning that all the wiring in this area were complete and the section was ready to mount.
I also fitted the number plate light to the rear body work section, meaning that all the wiring in this area were complete and the section was ready to mount.
No comments:
Post a Comment